Automated building lighting control by using R3 Arduino Uno
DOI:
https://doi.org/10.24036/jiaee.v2.i2.pp152-158Keywords:
Automatic lighting PIR sensor LDR sensor Energy efficiency AND logicAbstract
Lighting is a fundamental need in daily life; however, conventional lighting systems that are still widely used today tend to be inefficient due to manual operation. This often leads to energy waste, especially when lights are left on during the day or in unoccupied rooms. This final project discusses the design and implementation of an automatic lighting system based on a light sensor (LDR) and motion sensor (PIR), aimed at improving energy efficiency in building environments. The system is designed to activate the lights only when two conditions are met simultaneously: the presence of a person in the room and low ambient light intensity, using an AND logic as the decision-making basis. Test results show that the system responds accurately, consistently, and reliably to environmental changes, and is capable of significantly reducing electricity consumption. By adopting this automation technology, the system not only supports energy savings and reduces operational costs but also contributes to environmental preservation through the reduction of carbon footprint.
Downloads
References
[1] G. P. Pratama, Y. Yuningtyastuti, dan T. Sukmadi, "Perancangan Dimer Lampu Secara Otomatis Berbasis Mikrokontroler Pada Penerangan Dalam Ruangan," Transmisi: Jurnal Ilmiah Teknik Elektro, vol. 15, no. 4, hlm. 186-190, 2014.
[2] A. Rofii, M. Sobirin, dan J. Muliadi, "Prediksi Konsumsi Listrik Bangunan Gedung Menggunakan Model LSTM Untuk Efisiensi Energi Dan Mitigasi Lingkungan," dalam Seminar Nasional Konsorsium Untag Se Indonesia, Nov. 2024, hlm. 53-62.
[3] J. Liu, "Research on Dynamic Weak Current Dimming and Energy Saving System of Intelligent Lighting System Based on Automatic Control Theory," 2024 IEEE 4th International Conference on Electronic Technology, Communication and Information (ICETCI), Changchun, China, 2024, pp. 604-608, doi: 10.1109/ICETCI61221.2024.10594101.
[4] N. Verma and A. Jain, "Optimized Automatic Lighting Control in a Hotel Building for Energy Efficiency," 2018 International Conference on Power Energy, Environment and Intelligent Control (PEEIC), Greater Noida, India, 2018, pp. 168-172, doi: 10.1109/PEEIC.2018.8665417.
[5] X. Bai, J. Li, Y. Lu and J. Wang, "Research on Automatic Lighting Control Equipment of Tunnel Entrance," 2020 International Conference on Computer Network, Electronic and Automation (ICCNEA), Xi'an, China, 2020, pp. 373-377, doi: 10.1109/ICCNEA50255.2020.00083.
[6] A. Pachamanov, K. Georgiev, D. Pavlov, M. Dimitrov and A. Kolev, "Energy-Efficient Lighting Control in Road Tunnels," 2025 Tenth Conference on Lighting (Lighting), Sozopol, Bulgaria, 2025, pp. 1-3, doi: 10.1109/Lighting64836.2025.11081773.
[7] Y. Aussat, A. Rosmanis, dan S. Keshav, "A power-efficient self-calibrating smart lighting system," Energy and Buildings, vol. 259, p. 111874, 2022, doi: 10.1016/j.enbuild.2022.111874.
[8] B. Sun, Q. Zhang, dan S. Cao, "Development and implementation of a self-optimizable smart lighting system based on learning context in classroom," International Journal of Environmental Research and Public Health, vol. 17, no. 4, p. 1217, 2020, doi: 10.3390/ijerph17041217.
[9] Risfendra, Yoga Maulana Putra, H. Setyawan, and M. Yuhendri, “Development of Outseal PLC-Based HMI as Learning Training Kits for Programmed Control Systems Subject in Vocational Schools,” in 5th Vocational Education International Conference, 2023, pp. 506–511.
[10] M. I. Esario and M. Yuhendri, “Kendali Kecepatan Motor DC Menggunakan DC Chopper Satu Kuadran Berbasis Kontroller PI.pdf,” JTEV (Jurnal Tek. Elektro dan Vokasional), vol. 6, no. 1, pp. 296–305, 2020.
[11] L. A. Latif, R. Maulana, and R. Hidayat, “Monitoring and Controlling Electric Energy Usage Based on the Internet of Things,” Journal of Industrial Automation and Electrical Engineering., vol. 01, no. 01, pp. 75–81, 2024.
[12] M. Yuhendri, E. Mirshad, and A. R. Sidiqi, “Real-time Control of Separately Excited DC Motor Based on Fuzzy PI System Using Arduino,” Przegląd Elektrotechniczny, vol. 2024, no. 10, pp. 123–127, 2024, doi: 10.15199/48.2024.10.22.
[13] Badan Standardisasi Nasional, Standar Nasional Indonesia (SNI) 03-6197-2011: Tata cara perancangan sistem pencahayaan alami pada bangunan gedung, Jakarta: Badan Standardisasi Nasional, 2011.
[14] Yuchen Zhou, John Baras, and Shige Wang, "Hardware Software Co-design for Automotive CPS using Architecture Analysis and Design Language," arXiv, Mar. 2016.
[15] G. Mirskihk, "Software design principles and their application in software development life cycle," Int. J. Softw. Eng., vol. 9, no. 2, 2021.
