Real time control of buck converter with Sugeno Fuzzy Inference System using Arduino
DOI:
https://doi.org/10.24036/0zr57j76Keywords:
Buck converter , Sugeno Fuzzy , Arduino , Voltage control , DC-DC converterAbstract
As time progresses, technology for electrical and electronic equipment also develops very rapidly, generally these electronic devices use electrical energy as a source, energy sources also vary from high voltage for industry and low voltage for household appliances. There are two types of voltage, namely direct and alternating. This direct voltage can be obtained from a DC generator, battery, or AC voltage that is directed to DC. In general, a buck converter has the meaning of reducing DC to DC voltage which has two types of storage, namely capacitor and inductor, thus producing a small ripple value. To be able to get the appropriate voltage value, the output value needs to be set via the Simulink Matlab program, namely Sugeno Fuzzy Inference System. Buck converters that have been set using different settings are different from those that have not been set using fuzzy. Buck converter circuits that do not use a control system only reduce the voltage according to the existing results and if you want to change the output results then we have to change the duty cycle value manually of course this will not be effective in the long term or using the tool periodically whereas if you use a fuzzy control system We can set the output value of the buck converter according to what we need
Downloads
References
[1] S. A. Q. Mohammed and J. -W. Jung, "A State-of-the-Art Review on Soft-Switching Techniques for DC–DC, DC–AC, AC–DC, and AC–AC Power Converters," IEEE Transactions on Industrial Informatics, vol. 17, no. 10, pp. 6569-6582, Oct. 2021.
[2] I. Alhurayyis, A. Elkhateb and J. Morrow, "Isolated and Nonisolated DC-to-DC Converters for Medium-Voltage DC Networks: A Review," IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 9, no. 6, pp. 7486-7500, Dec. 2021.
[3] C. Shah et al., "Review of Dynamic and Transient Modeling of Power Electronic Converters for Converter Dominated Power Systems," in IEEE Access, vol. 9, pp. 82094-82117, 2021, doi: 10.1109/ACCESS.2021.3086420.
[4] A. Anggawan and M. Yuhendri, “Kendali Tegangan Output Buck Converter Menggunakan Arduino Berbasis Simulink Matlab,” JTEIN J. Tek. Elektro Indones., vol. 2, no. 1, pp. 34–39, 2021, doi: 10.24036/jtein.v2i1.110.
[5] J. G. Yadav, Y. K. Yadav and N. Kumar, "Mathematical Modelling & Simulation of Synchronous Buck Converter and Analysis of Its Simulation Results," 2023 International Conference on IoT, Communication and Automation Technology (ICICAT), Gorakhpur, India, 2023, pp. 1-6, doi: 10.1109/ICICAT57735.2023.10263672.
[6] M. Yuhendri, I. Z. Candra, and C. Dewi, “Kendali Boost converter Berbasis Fuzzy sugeno,” JTEIN J. Tek. Elektro Indones., vol. 4, no. 1, pp. 50–59, 2023.
[7] S. A. Kumar, M. N. Suneetha and C. Lakshminarayana, "The Simulation Study of Solar PV Coupled Synchronous Buck Converter with Lead acid Battery Charging," 2019 International Conference on Power Electronics Applications and Technology in Present Energy Scenario (PETPES), Mangalore, India, 2019, pp. 1-4, doi: 10.1109/PETPES47060.2019.9003841.
[8] R. M. Sudhan Rao, M. Asad and A. K. Singha, "Analysis and Design of a Digital Average Current-mode Controlled Buck Converter," 2020 IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES), Jaipur, India, 2020, pp. 1-4, doi: 10.1109/PEDES49360.2020.9379636.
[9] P. K. Yadav and R. Dahiya, "Application of SPMC topology for single phase boost AC-AC and boost DC-DC converter," 2012 IEEE Fifth Power India Conference, Murthal, India, 2012, pp. 1-6, doi: 10.1109/PowerI.2012.6479586.
[10] M. Kumar, G. Panda and D. V. S. K. R. K, "Analysis of Conventional and Interleaved Boost Converter with Solar Photovoltaic System," 2022 International Conference on Intelligent Controller and Computing for Smart Power (ICICCSP), Hyderabad, India, 2022, pp. 1-6, doi: 10.1109/ICICCSP53532.2022.9862351.
[11] A. Alfaris and M. Yuhendri, “Sistem Kendali dan Monitoring Boost Converter Berbasis GUI (graphical user interface) Matlab Menggunakan Arduino,” JTEIN J. Tek. Elektro Indones., vol. 1, no. 2, pp. 266–272, 2020, doi: 10.24036/jtein.v1i2.83.
[12] A. Mosavi, S. Shamshirband, E. Salwana, K. wing Chau, and J. H. M. Tah, “Prediction of multi-inputs bubble column reactor using a novel hybrid model of computational fluid dynamics and machine learning,” Eng. Appl. Comput. Fluid Mech., vol. 13, no. 1, pp. 482–492, 2019, doi: 10.1080/19942060.2019.1613448.
[13] S. Dileep, G. V. Dinesh and P. S, "Comparative Analysis of Isolated Interleaved Boost Converter and Full Bridge Converter," 2023 Innovations in Power and Advanced Computing Technologies (i-PACT), Kuala Lumpur, Malaysia, 2023, pp. 1-6, doi: 10.1109/i-PACT58649.2023.10434594.
[14] M. Z. Fikri and M. Yuhendri, “Kendali Tegangan Boost Converter Berbasis Adaptive Neuro Fuzzy Inference System ( ANFIS ),” JTEIN J. Tek. Elektro Indones., vol. 4, no. 1, pp. 416–427, 2023.
[15] N. Rana, S. Banerjee, S. K. Giri, A. Trivedi and S. S. Williamson, "Modeling, Analysis and Implementation of an Improved Interleaved Buck-Boost Converter," IEEE Transactions on Circuits and Systems II: Express Briefs, vol. 68, no. 7, pp. 2588-2592, July 2021, doi: 10.1109/TCSII.2021.3056478.
[16] W. -L. Zeng et al., "A SAR-ADC-Assisted DC-DC Buck Converter With Fast Transient Recovery," IEEE Transactions on Circuits and Systems II: Express Briefs, vol. 67, no. 9, pp. 1669-1673, Sept. 2020, doi: 10.1109/TCSII.2020.3006274.
[17] D. Ravi and A. Ghosh, "Voltage Mode Control of Buck Converter using Practical PID Controller," 2022 International Conference on Intelligent Controller and Computing for Smart Power (ICICCSP), Hyderabad, India, 2022, pp. 1-6.
[18] V. Siddhartha and Y. V. Hote, "Robust PID Controller Design for DC-DC Converters: The Buck Converter," 2022 IEEE Electrical Power and Energy Conference (EPEC), Victoria, BC, Canada, 2022, pp. 30-37.
[19] D. Sinha Roy and S. D. P., "Performance of Fly-buck DC-DC Converter using PI/PID-Based Controller for Applications in ElectricVehicles," 2023 IEEE International Conference on Distributed Computing, VLSI, Electrical Circuits and Robotics (DISCOVER), Mangalore, India, 2023, pp. 117-122, doi: 10.1109/DISCOVER58830.2023.10316726.
[20] Widjonarko, G. A. Rahardi, C. Avian, W. Hadi, D. W. Herdiyanto and P. L. Satrio, "Driver for LED Lamp with Buck Converter Controlled by PID," 2021 International Seminar on Intelligent Technology and Its Applications (ISITIA), Surabaya, Indonesia, 2021, pp. 216-219, doi: 10.1109/ISITIA52817.2021.9502199.
[21] P. Ulandari and M. Yuhendri, “Kendali Tegangan Output Buck Converter Berbasis Fuzzy Mamdani,” JTEIN J. Tek. Elektro Indones., vol. 5, no. 2, pp. 411–420, 2024.
[22] K. Bendaoud et al., "Fuzzy logic controller (FLC): Application to control DC-DC buck converter," 2017 International Conference on Engineering & MIS (ICEMIS), Monastir, Tunisia, 2017, pp. 1-5, doi: 10.1109/ICEMIS.2017.8272980.
[23] R. R. Rahmadani and C. Dewi, “Control of Buck Converter Using Artificial Neural Network,” Journal of Industrial Automation and Electrical Engineering, vol. 01, no. 01, pp. 13–20, 2024.
[24] M. Syafitri and M. Yuhendri, “Control of DC-DC Buck Converter Based on Adaptive Neuro Fuzzy Inference System ( ANFIS ),” JTEIN J. Tek. Elektro Indones., vol. 5, no. 2, pp. 476–486, 2024.
[25] S. Saadatmand, P. Shamsi and M. Ferdowsi, "The Voltage Regulation of a Buck Converter Using a Neural Network Predictive Controller," 2020 IEEE Texas Power and Energy Conference (TPEC), College Station, TX, USA, 2020, pp. 1-6.
