Cycle time analysis of automation system using PLC and HMI based Scara Robot
DOI:
https://doi.org/10.24036/asxh9y88Keywords:
SCARA, Palletizing , PLC, HMI, Cycle TimeAbstract
This article discusses about the design of palletizing machine automation system using SCARA robot based on PLC and HMI. The purpose of this design is to be able to perform programming on the SCARA Robot using a Programmable Logic Controller (PLC), design an interface design for the control system and monitor the system response using a Human Machine Interface (HMI). And test the functional performance of the SCARA T3 robot. The design is supported by Siemens S7-1200 PLC device and Siemens KTP-700 Basic PN HMI. A series of programming processes and making system interfaces are carried out using Epson RC + 7.0 and TIA Portal software. The results of the test can be concluded the design of the palletizing machine automation system can run well at 80% high speed with a 100% success percentage and 0% error percentage.
Downloads
References
[1] S. C. Zhen, M. C. Ma, X. L. Liu, F. Chen, H. Zhao, and Y. H. Chen, “Model-based robust control design and experimental validation of SCARA robot system with uncertainty,” JVC/Journal Vib. Control, vol. 29, no. 1–2, pp. 91–104, 2023, doi: 10.1177/10775463211042178
[2] P. S. Wategaonkar, “Review On 4 DOF PLC Controlled Robotic ARM for Pick and Place Using IR Sensor And HMI,” vol. 4, no. 5, pp. 1544–1550, 2022.
[3] I. Rifaldo and M. Yuhendri, “Sistem Monitoring Kecepatan Motor Induksi dengan HMI Berbasis PLC,” JTEIN J. Tek. Elektro Indones., vol. 3, no. 2, pp. 319–325, 2022.
[4] A. Minsandi et al., “Design and Implementation of Robot Abu Robocon Using Joystik Wireless Based on Extrasenory Percepsion,” J. Ind. Autom. Electr. Eng., vol. 01, no. 01, pp. 39–45, 2024.
[5] D. Kajzr, T. Myslivec, and J. Černohorský, “Modelling, Analysis and Comparison of Robot Energy Consumption for Three-Dimensional Concrete Printing Technology,” Robotics, vol. 13, no. 5, 2024, doi: 10.3390/robotics13050078.
[6] S. Surati, S. Hedaoo, T. Rotti, V. Ahuja, and N. Patel, “Pick aand Place Robotic Arm: A Review Paper,” Int. Res. J. Eng. Technol., vol. 8, no. 2, pp. 2121–2129, 2021.
[7] R. Bouzid, H. Gritli, and J. Narayan, “ANN Approach for SCARA Robot Inverse Kinematics Solutions with Diverse Datasets and Optimisers,” Appl. Comput. Syst., vol. 29, no. 1, pp. 24–34, 2024, doi: 10.2478/acss-2024-0004.
[8] Y. Al Mashhadany, A. K. Abbas, S. Algburi, and B. A. Taha, “Design and Analysis of a Hybrid Intelligent SCARA Robot Controller Based on a Virtual Reality Model,” J. Robot. Control, vol. 5, no. 6, pp. 1722–1735, 2024, doi: 10.18196/jrc.v5i6.23158.
[9] H. V. Nguyen, V. D. Cong, and P. X. Trung, “Development of a SCARA Robot Arm for Palletizing Applications Based on Computer Vision,” FME Trans., vol. 51, no. 4, pp. 541–549, 2023, doi: 10.5937/fme2304541N.
[10] D. S. Fahreza and R. Risfendra, “Cycle Time Analysis Of AS/RS (Automated Storage & Retrieval System) Using SCADA,” JTEIN J. Tek. Elektro Indones., vol. 5, no. 1, pp. 211–222, 2024, doi: 10.24036/jtein.v5i1.647.
[11] Risfendra, Yoga Maulana Putra, H. Setyawan, and M. Yuhendri, “Development of Outseal PLC-Based HMI as Learning Training Kits for Programmed Control Systems Subject in Vocational Schools,” in 5th Vocational Education International Conference, 2023, pp. 506–511.
[12] D. Kajzr, T. Myslivec, and J. Cernohorsky, “An Open PLC-Based Robot Control System for 3D Concrete Printing,” Robotics, vol. 12, no. 4, 2023, doi: 10.3390/robotics12040096.
[13] D. H. Simanjuntak and R. Risfendra, “Sistim Monitoring Pada Sorting Machine dengan HMI Berbasis PLC,” JTEIN J. Tek. Elektro Indones., vol. 2, no. 1, pp. 65–70, 2021, doi: 10.24036/jtein.v2i1.125.
[14] J. Zhang, J. Xie, D. Zhang, and Y. Li, “Development of Control System for a Prefabricated Board Transfer Palletizer Based on S7-1500 PLC,” Electron., vol. 13, no. 11, 2024, doi: 10.3390/electronics13112147.
[15] S. S. Alam, R. Hidayat, and M. Abdi, “Otomatisasi Penyemprotan Polyester Menggunakan Kawasaki Cobot dengan Human Machine Interface ( HMI ) Berbasis Web,” vol. 16, no. 2, pp. 119–129, 2024
