SCARA Robot Application for Automatic Vending Machine Movement Based on HMI dan IoT
DOI:
https://doi.org/10.24036/d6bn9082Keywords:
Robot Scara, Vending Machine, Node-RED, Controller, Pick and PlaceAbstract
This design discusses the application of HMI and IoT-based SCARA robots to control and monitor the movement of vending machines. The purpose of this design is to be able to perform programming on the SCARA Robot using the RC-90B Controller and Programmable Logic Controller (PLC), design interface designs for control systems, and monitor system responses using the Human Machine Interface (HMI) and Internet of Things (IoT). As well as testing the functional performance of the SCARA robot and Node-RED. This design is supported by the RC-90B controller, Siemens S7-1200 PLC, Seimens KTP-700 Basic PN HMI, and Node-RED. A series of programming processes and making system interfaces are carried out using Epson RC-7.0 software, TIA Portal, and Node-RED. In this design, a vending machine movement process will be made, namely: pick, place, and assembly materials using vacuum and gripper assistance. In addition, the author also uses the palletizing function in the material preparation process. Then take important data such as robot speed, cycle time, and success rate, where each product is tested and get the best results with a 0% error value
Downloads
References
[1] S. Z. Gunawan, A. B. Kaswar, M. Yantahin, Masikki, and A. Dewa Rusanda, “Perancangan Sistem Vending Machine Berbasis E-Money,” Membangun Negeri dengan Inov. tiada Henti Melalui Penelit. dan Pengabdi. Kpd. Masy., pp. 2248–2263, 2022.
[2] A. Syahri, “Desain Kontrol Vending Mesin Berbasis Fpga Dengan Finite State Machine,” J. Ilm. Inform. dan Komput., vol. 21, no. 1, pp. 67–78, 2016.
[3] World Economic Forum, The Future of Jobs Report. 2018.
[4] S. Dasgupta and A. Ghosh, “Bluetooth Controlled Arduino Based Robotic Arm,” Asian J. Converg. Technol., vol. 7, no. 1, pp. 115–120, 2021.
[5] M. A. K. Bahrin, M. F. Othman, and N. H. N. Azli, “Jurnal Teknologi Full Paper Industrial 4.0: A Review On Industrial Automation and Robotic,” J. Teknol. (Sciences Eng. UTM, vol. 78 (6–13), pp. 137–143, 2016.
[6] A. Setiawan and I. Setiawan, “Perancangan Lengan Robot Pneumatik Pemindah Plat Menggunakan Programmable Logic Controller,” Jur. Tek. Elektro, Fak. Tek. …, 2011.
[7] M. Raihan Usman, “Pengantar PLC,” no. November, 2022.
[8] D. H. Simanjuntak and R. Risfendra, “Sistim Monitoring Pada Sorting Machine dengan HMI Berbasis PLC,” JTEIN J. Tek. Elektro Indones., vol. 2, no. 1, pp. 65–70, 2021,
[9] V. A. Prasetya, I. N. Piarsa, and D. M. Sri Arsa, “Rancang Bangun Prototipe Sistem Monitoring Vending Machine Berbasis Internet of Things,” Jusikom J. Sist. Komput. Musirawas, vol. 6, no. 1, pp. 9–22, 2021.
[10] A. S. Ahmed, H. A. Marzog, and L. A. Abdul-Rahaim, “Design and implement of robotic arm and control of moving via IoT with Arduino ESP32,” Int. J. Electr. Comput. Eng., vol. 11, no. 5, pp. 3924–3933, 2021.
[11] Seiko Epson Corporation, Robot Controller RC90/ RC90-B, Rev.26. 2013.
[12] S. Manesis and G. Nikolakopoulos, Introdution to Industrial Automation. 2018.
[13] T. M. Sages, Programmable Logic Controllers. 1991. doi: 10.1115/CEC1991-3705.
[14] Siemens, SIMATIC S7-1200 Easy Book Manual. 2015.
[15] P. L. C. Nedir, “S7 1200 ile PLC Programlama”.
[16] A.B.Chaudhuri, Flowchart and lgorithm B asics. 2020.
