Design of a Two-Way Conveyor Belt Control System Based on PLC and HMI
Keywords:
Control System , Conveyor Belt , Toshiba Vf-S15 , Programmable Logic Controller , Human Machine InterfaceAbstract
This research aims to control and monitor the direction of rotation and speed of the conveyor belt based on PLC and HMI. Conveyor belt control settings are carried out using a Toshiba VF-S15 Variable Speed Drive which is controlled by the Simatic S7 1200 1215C Programmable Logic Controller. This induction motor control and monitoring system is implemented on a 0.37 kW induction motor as a conveyor belt drive using the Simatic KTP700 Comfort Human Machine Interface. The test results show that the control and monitoring system for the direction of rotation and speed of the conveyor belt has worked well in automatic mode and manual mode. The HMI display used as an interface for controlling and monitoring the conveyor belt has successfully controlled the conveyor belt and displays conveyor belt speed data close to the same as the speed data obtained from the measuring instrument
Downloads
References
[1] I. N. Voytyuk and O. M. Bolshunova, "Ensuring Energy Efficiency of the Belt-type Conveyor Electric Motor Drive Operation Due to Noncontact Control of Mass Discharge of Cargo During Its Transport in Mining Condition," 2019 IEEE Conference of Russian Young Researchers in Electrical and Electronic Engineering (EIConRus), Saint Petersburg and Moscow, Russia, 2019, pp. 736-739, doi: 10.1109/EIConRus.2019.8657124.
[2] D. A. Kotin, S. E. Sukhinin and G. S. Sidorov, "Minimizing the Traction Factor of a Multi-Motor Belt Conveyor," 2023 IEEE 24th International Conference of Young Professionals in Electron Devices and Materials (EDM), Novosibirsk, Russian Federation, 2023, pp. 1700-1704, doi: 10.1109/EDM58354.2023.10225155.
[3] T. M. Parreiras, J. C. G. Justino, A. V. Rocha and B. d. J. C. Filho, "True Unit Power Factor Active Front End for High-Capacity Belt-Conveyor Systems," IEEE Transactions on Industry Applications, vol. 52, no. 3, pp. 2737-2746, May-June 2016, doi: 10.1109/TIA.2016.2533499.
[4] L. E. González-Jiménez, F. J. Arriaga-Méndez, O. F. Mendiola-Meza and E. Vargas-Mascorro, "Embedded Diagnostics of Conveyor Belts Actuated by Induction Motors," IEEE Latin America Transactions, vol. 19, no. 01, pp. 107-114, January 2021, doi: 10.1109/TLA.2021.9423853.
[5] F. Hanifah and M. Yuhendri, “Kontrol dan Monitoring Kecepatan Motor Induksi Berbasis Internet of Things,” JTEIN J. Tek. Elektro Indones., vol. 4, no. 2, pp. 519–528, 2023.
[6] K. R. S. Suda, E. Purwanto, B. Sumantri, A. A. Muntashir, and R. O. Y. Hendra, “Pemodelan Sistem Kendali Motor Induksi Tiga Fasa menggunakan Pengendali Neuro-Fuzzy Melalui Metode Direct Torque Control,” ELKOMIKA J. Tek. Energi Elektr. Tek. Telekomun. Tek. Elektron., vol. 10, no. 4, p. 888, 2022, doi: 10.26760/elkomika.v10i4.888.
[7] D. H. Prastiko and A. Supardi, “Pengendali dan Monitoring Kecepatan Putar Motor Induksi 3 Fasa Berbasis Programmable Logic Controller dan Expansion dengan Human Machine Interface,” Emit. J. Tek. Elektro, vol. 22, no. 2, pp. 168–176, 2022, doi: 10.23917/emitor.v22i2.19110.
[8] I. Rifaldo and M. Yuhendri, “Sistem Monitoring Kecepatan Motor Induksi dengan HMI Berbasis PLC,” JTEIN J. Tek. Elektro Indones., vol. 3, no. 2, pp. 319–325, 2022.
[9] J. C. Lopez, O. David Flórez Cediel and J. H. Mora, "A low-cost adjustable speed drive for three phase induction motor," 2017 IEEE Workshop on Power Electronics and Power Quality Applications (PEPQA), Bogota, Colombia, 2017, pp. 1-4, doi: 10.1109/PEPQA.2017.7981637.
[10] S. Yimchoy and U. Supatti, "Reduction of Energy and Water Loss in the Water Supply Pump Systems by Using PLC with Variable Speed Drives," 2021 International Conference on Power, Energy and Innovations (ICPEI), Nakhon Ratchasima, Thailand, 2021, pp. 9-12, doi: 10.1109/ICPEI52436.2021.9690684.
[11] G. Valencia-Palomo and J. A. Rossiter, "PLC implementation of a predictive controller using Laguerre functions and multi-parametric solutions," UKACC International Conference on Control 2010, Coventry, 2010, pp. 1-6, doi: 10.1049/ic.2010.0440.
[12] D. Mihaylova, S. Stoyanov, P. Marinova, S. Zahariev, A. Marinov and K. Solenkov, "Structural Analysis of a PLC Controller based Industrial Application," 2023 4th International Conference on Communications, Information, Electronic and Energy Systems (CIEES), Plovdiv, Bulgaria, 2023.
[13] T. Joo and D. Shin, "Formalizing Human–Machine Interactions for Adaptive Automation in Smart Manufacturing," IEEE Transactions on Human-Machine Systems, vol. 49, no. 6, pp. 529-539, Dec. 2019, doi: 10.1109/THMS.2019.2903402.
[14] F. Dames dan D. T. P. Yanto, “Sistem Kendali dan Monitoring Kecepatan Motor Servo Berbasis Human Machine Interface,” JTEIN J. Tek. Elektro Indones., vol. 3, no. 2, hal. 487–495, 2022.
[15] M. Zheng, M. S. Crouch and M. S. Eggleston, "Surface Electromyography as a Natural Human–Machine Interface: A Review," IEEE Sensors Journal, vol. 22, no. 10, pp. 9198-9214, 15 May15, 2022, doi: 10.1109/JSEN.2022.3165988.
[16] R. Jannah and M. Yuhendri, “Pembuatan Jobsheet Kendali Motor Induksi menggunakan Human Machine Interface,” J. Pendidik. Tek. Elektro, vol. 3, no. 2, pp. 184–191, 2022
