DC motor speed control using two quadrant DC Chopper based on Sliding Mode Controller
DOI:
https://doi.org/10.24036/jiaee.v2.i2.pp175-181Keywords:
DC Motor , Sliding mode controller , MATLAB , Arduino Mega 2560Abstract
DC motors are vital components in the industrial world, thanks to their ability to provide precise control over speed and torque. In various manufacturing processes, these motors are used to drive machines, conveyor systems, and other automated applications. However, the challenge faced is speed instability when the motor operates under variations in load and speed. To overcome this problem, this study focuses on controlling the speed of a DC motor using a two-quadrant DC chopper based on a Sliding Mode Controller (SMC). The SMC method has the ability to overcome disturbance models and provide consistent performance under dynamic conditions, making it very effective in maintaining the performance of a DC motor control system in various operational situations. In addition, the SMC is able to ensure the output system can track the desired reference and generate a control signal that minimizes tracking errors. The control signal in the SMC consists of two components, namely the reach mode and the slide mode. The design process in this study includes programming the Arduino Mega 2560 microcontroller, and the implementation of the SMC control system is carried out using MATLAB Simulink. Simulation results show that the SMC-based control can maintain a stable motor speed despite significant changes in load and speed. Thus, this research makes a significant contribution towards the development of more effective DC motor control systems for industrial applications
Downloads
References
[1] P. Tawakal, A. Nugroho, and M. Facta, “Controlled Rectifier for Direct Current Motor Drive on a Conveyor Prototype,” Transient, vol. 5, no. 3, pp. 389–394, 2023.
[2] X. Zhang, "Design and implementation of fuzzy PID DC motor control system based on STM32," 2023 IEEE International Conference on Control, Electronics and Computer Technology (ICCECT), Jilin, China, 2023, pp. 1129-1131, doi: 10.1109/ICCECT57938.2023.10141000.
[3] R. Muhammad and M. Yuhendri, “Variable speed control of DC motor using four quadrant controlled rectifier based on Human Machine Interface,” Journal of Industrial Automation and Electrical Engineering., vol. 01, no. 01, pp. 229–235, 2024.
[4] W. -J. Tang, Z. -T. Liu and Q. Wang, "DC motor speed control based on system identification and PID auto tuning," 2017 36th Chinese Control Conference (CCC), Dalian, China, 2017, pp. 6420-6423, doi: 10.23919/ChiCC.2017.8028376.
[5] M. Wei, "The Speed Control of Brushless DC Motor Based on Genetic Fuzzy PID Algorithm," 2023 3rd International Conference on Electrical Engineering and Control Science (IC2ECS), Hangzhou, China, 2023, pp. 866-872, doi: 10.1109/IC2ECS60824.2023.10493526.
[6] M. Yuhendri, E. Mirshad, and A. R. Sidiqi, “Real-time Control of Separately Excited DC Motor Based on Fuzzy PI System Using Arduino,” Przegląd Elektrotechniczny, vol. 2024, no. 10, pp. 123–127, 2024, doi: 10.15199/48.2024.10.22.
[7] I. Cojuhari, I. Fiodorov, B. Izvoreanu and D. Moraru, "Synthesis of PID Algorithm for Speed Control of the DC Motor," 2022 International Conference on Development and Application Systems (DAS), Suceava, Romania, 2022, pp. 1-5, doi: 10.1109/DAS54948.2022.9786125.
[8] R. Shah, T. Sands, „ Comparing Methods of DC Motor Control for UUVs," In: Applied Sciences, 11 ( 11 ), 4972, 2021. doi: 10.3390/app11114972.
[9] S. P. Simon, L. Dewan and M. P. R. Prasad, "Design and Analysis of ITAE Tuned Robust PID Controller for Brushed DC Motor," 2022 IEEE Silchar Subsection Conference (SILCON), Silchar, India, 2022, pp. 1-6, doi: 10.1109/SILCON55242.2022.10028938.
[10] R. Rizki, A. Hendra, M. Yuhendri, A. Info, and A. N. Network, “DC motor control using a four-quadrant chopper based on artificial neural networks,” Journal of Industrial Automation and Electrical Engineering., vol. 01, no. 02, pp. 9–16, 2024.
[11] X. Wu, H. Yan, Y. Wang and C. Lin, "Analysis of Brushless DC Motor Control Strategy Based on Q-Learning Algorithm," 2024 11th International Forum on Electrical Engineering and Automation (IFEEA), Shenzhen, China, 2024, pp. 1182-1187, doi: 10.1109/IFEEA64237.2024.10878709.
[12] K. Venugopal, S. K. Manoharan and R. Kannan Megalingam, "Position Estimation in DC Motor using Strain Gauge based Closed Loop Control for Robotic Grippers," 2022 IEEE IAS Global Conference on Emerging Technologies (GlobConET), Arad, Romania, 2022, pp. 355-360, doi: 10.1109/GlobConET53749.2022.9872356.
[13] M. H. Mthboob, H. TH. S. Alrikabi, and I. A. Aljazaery, “A Control System of DC Motor Speed: Systematic Review,” Wasit Jornal of Computer and Mathematic Science, vol. 2, pp. 93–111, 2023.
[14] F. Rahmadi and M. Yuhendri, “Kendali Kecepatan Motor DC Menggunakan Chopper DC Dua Kuadran Berbasis Kontroller PI,” JTEIN J. Tek. Elektro Indones., vol. 1, no. 2, p. 241, 2020, doi: https://doi.org/10.24036/jtein.v1i2.71.
[15] X. Wang, C. Suh, “Precision Concurrent Speed and Position Tracking of Brushed DC Motors Using Nonlinear Time-Frequency Control,” Journal of Vibration and Control, vol. 23, 2016.
[16] A. A. Othman, H. A. Shatla and M. Hamdy, "A Comparative Study of Auto-tuned PID Controller based on Different SMC Schemes for a DC Motor Speed Control: Practical Validation," 2022 23rd International Middle East Power Systems Conference (MEPCON), Cairo, Egypt, 2022, pp. 01-06, doi: 10.1109/MEPCON55441.2022.10021808.
[17] M. Ahmed, S. Abdulmumini Jalo, U. Bilkisu Bapetel, M. Usman Ilyasu, E. Isa Mohammed Inuwa and G. Elhassan, "Reaching Law based Sliding Mode Control of Armature Controlled DC Motor," 2020 IEEE 8th Conference on Systems, Process and Control (ICSPC), Melaka, Malaysia, 2020, pp. 112-117, doi: 10.1109/ICSPC50992.2020.9305796.
[18] M. I. Esario and M. Yuhendri, “Kendali Kecepatan Motor DC Menggunakan DC Chopper Satu Kuadran Berbasis Kontroller PI,” JTEV (Jurnal Tek. Elektro dan Vokasional), vol. 6, no. 1, pp. 296–305, 2020.
[19] L. Zhang, G. Mahmoud, M. Li and Y. Chen, "Robust Sliding Mode Controller with Suppressor for DC Motor System with Disturbances," 2019 Chinese Automation Congress (CAC), Hangzhou, China, 2019, pp. 1676-1681, doi: 10.1109/CAC48633.2019.8996776.
[20] H. Maghfiroh, A. Sujono, M. Ahmad, and C. H. B. Apribowo, “Basic Tutorial on Sliding Mode Control in Speed Control of DC-motor,” J. Electr. Electron. Information, Commun. Technol., vol. 2, no. 1, pp. 1–4, 2020, doi: 10.20961/jeeict.2.1.41354
